From the monthly archives: June, 2011

We are pleased to present below all posts archived in 'June, 2011'. If you still can't find what you are looking for, try using the search box.

May Truck Tonnage

The ATA Truck Tonnage Index dropped a bit more than anticipated for May, down 2.3% vs. April.

With Manufacturing output up 0.4% (up 0.6% excluding the auto sector), consumer-oriented durable goods up just under 2%, and most other components of Industrial Production essentially flat, I would have expected a Tonnage result comparable to April’s.

2.3% is not a great drop, at least not enough to suggest any appreciable change in demand for new and used trucks. Plus, the Index is based on a survey, so we must make some mental allowances for variations in responses.

I am considering this month’s result an example of the minor fluctuations we should expect to see as the economy continues to sputter its way towards recovery. With the auto industry ramping back up in the short term, plus gas prices set to head further downwards, the fundamentals still support a healthy freight environment.
 

Preliminary May Sales Data

With about 85% of our individual dealer sales reports in, it looks like there was a drop in sales volume for May from this segment. We still have yet to hear from a few of our larger-volume dealers, so I’m hesitant to provide an estimate – but look for May to unwind much of the volume gains made in the preceding months.

Other sources were comparable to April in terms of volume, so this phenomenon appears limited to the dealer segment for the time being.

Happily, pricing in general does not appear to have changed appreciably, with retail selling prices looking comparable to April. The newest model years (2008 and newer) may be slowing their appreciation curve as more of these trucks enter the secondary market, but supply is still inadequate to meet demand.

For now, then, this development appears to be limited to volume. Look for final analysis in our July Guidelines, which will be out the second week of the month.
 

'Successful Dealer' Highlights the Used Truck Market

The June 23rd edition of Successful Dealer talks about the used truck market. The article states that we are in a “seller’s market,” which I doubt anyone involved in the used truck industry would disagree with. The article also raised an important point about financing – some lenders are still having a hard time recognizing that used truck prices have risen as much as they have in the past year and a half. As we stated in the May edition of Guidelines, four-year-old trucks brought almost 40% more money in 1Q 2011 than they did in 1Q 2010.

Also, as I mentioned in a previous blog, some lenders may be using only our base values and excluding options/accessories and mileage. While any business is entitled to use our values as they see fit, a complete NADA valuation includes all adjustments.

As always, I’m here to clarify any of these issues. Just send an e-mail to cvisser@nada.org.

No Gloom & Doom Yet on the Industrial Side

As we predicted, US Industrial Production stayed essentially flat for the second month in a row, rising 0.1% over April. Despite continued impact of the Japan disaster on the auto industry, the manufacturing sector was up 0.4% over April. It appears that vehicle manufacturing had less of an impact in May, as manufacturing was up 0.6% if you exclude auto production. Another trucking-focused piece of the puzzle, consumer goods, was down a negligible 0.1% in May. The minor drop in durable goods for April was basically canceled out in May. Home electronics were up 1.7%, appliances, furniture, and carpeting was up 1.8%, and miscellaneous durables was up 0.7% Bottom line? The growth of the industrial economy has slowed in the past two months, but the data isn’t yet showing much reason for concern. As the auto industry ramps back up in the next few months, look for a more meaningful uptick in the manufacturing sector. And barring any unlikely increase in gas prices, consumers should keep the durables ...

Continue Reading →

Truck Manufacturing Still Looking Good

As reported in Transport Topics, the Class 8 manufacturing environment remained strong in May. Orders were down 38% from April, but still ahead of last May by 85%. The industry should be on track to build somewhere around 250K trucks this year, the most since 2006. Manufacturers, dealers, and analysts continue to state that new orders are for replacement of older equipment rather than expansion of fleet size. With the economy now pretty clearly in a slower growth mode, we seem to have made our way through the sweet part of the recovery without adding substantially to the size of the national trucking fleet. On the bright side, the manufacturing backlog essentially takes us to the end of the year if not beyond. As such, barring any unexpected economic disaster that results in order cancellations, jobs and corporate revenues connected to truck manufacturing should be safe at least until then. At the same time, with all relevant measures showing a moderate slowdown in the recovery, it might not be a bad t ...

Continue Reading →

Expect Another Drop in Tonnage for May

The Pulse of Commerce Index, a measure that uses sale of diesel as a proxy for freight activity, dropped by 0.9% in May. The PCI is a good “heads up” for what we might expect the ATA’s Truck Tonnage Index, as well as the Fed’s Industrial Production figures, to show when they are released in about two weeks. As stated in the report, economic growth from 2009 to mid-2010 was based mainly on inventory restocking. The trucking economy benefited from this growth, as demand for new and used trucks made clear. Interestingly, the freight environment hasn’t let up much since the economy shifted into a slower growth mode. Orders for new trucks remain at elevated levels, and selling prices for used trucks are still at historic highs. We will get a clearer picture of the industrial sector when the official figures are released next week, but I would bet on continued decrease in manufacturing of autos and durable goods (the former due to continued parts shortages from the Japan disaster, and the latter due to reduce ...

Continue Reading →

June ATD/NADA Official Commercial Truck Guidelines

The June ATD/NADA Official Commercial Guidelines are available. Average selling price of sleeper tractors for April up $1,200 over March despite higher average mileage. There was a 10% increase in the number of trucks reportedly sold in April. Used truck industry trends forecast to continue upward despite economic headwinds. To read the full Guidelines, download here.

Looking at the Construction Market

As a counterpart to the medium duty graph a few days ago, let’s take a look at how construction trucks have performed so far this year. Due to the low sales volume of this segment of the market, I’ve combined retail, wholesale, and auction sales into one graph. This is legitimate from a statistical standpoint because we’re looking for a trend rather than absolute numbers. Trucks included are all body types, all model years, adjusted for mileage. As you can see, our data shows an increase from January to February, followed by an essentially flat market. The average mileage, age, and spec mix of trucks sold in January were comparable to other months, so the increase should be at least partly attributable to actual demand. While the construction market in general has been essentially moribund since the recession began, I suspect there was a minor increase in activity in the beginning of the year – not on any macro level, but perhaps on a select, localized level. Again, due to the low sales volume inhere ...

Continue Reading →

A Look at the Medium Duty Markets

There has been some discussion recently about activity in the medium duty markets. I say “markets” instead of “market” because the medium duty sector encompasses a huge variety of GVW’s and usage types – everything from cube vans to “baby 8” construction trucks. Rather than rehash word of mouth, let’s look at actual data. We typically rely mainly on our retail sales database for Class 8 price data, but for medium duty trucks we rely more on auction data. This is due to the vastly greater number of medium duty trucks that are reported sold at auctions compared to retail lots. Our AuctionNet partnership with NAAA  is the main reason for this. With that in mind, below are results to date for Class 3 Conventionals, Class 3+4 Cabovers, and Class 6 Conventionals. These segments traditionally see high amounts of activity, and provide a good cross-section of the various usage types. May data was not yet available at time of writing. I will update the charts next week with that data.   Class 6 Con ...

Continue Reading →

April Sales Results

With 100% of April sales data locked up in the database, we now know it was an even stronger month than we anticipated.

As mentioned in the most recent AutoFocus Market Update, average selling prices for all sleeper tractors under 1M miles rose $1100 over March. Average mileage for that segment was up about 6000.

The benchmark four-year-old sleeper market rose by just under $1200, with mileage for that group up about 16,000. We have a continuation of price and mileage rising in tandem.

Sales volume was the biggest surprise, adding another 10% to the 25% increase we saw for March.

Look for expanded analysis of this data along with predictions in next week’s GuideLines.
 

LIVE CHAT
SEARCH BLOG
ARCHIVE